Search
Choose!

T-Battery Simulator

  • Availability: On Order
  • Brands Thepra
  • Product Code: 115056000
  • Product viewed: 8235





Share:

T-Battery Simulator

Flexible teaching system for the safe training of the high-voltage deactivation and the function of the inverter in conjunction with a high-voltage battery. It includes a battery unit and an inverter box that is connected with a 5 meter cable.

  • At a glance
  • Features
  •  The teaching unit is suitable for use both in the laboratory and in a conventional combustion engine vehicle. Such a vehicle will be supplemented by the main components of a hybrid vehicle, which can then be examined in detail
  •  Connecting the terminals 30, 31 and 15
  •  Disconnect with original service plug
  •  Pilot line with switching relays with integrated LEDs to illustrate the switching function and system verification
  •  Measurable voltage at the inverter approximately 210V (at less than 10mA)
  •  Signals at the inverter input and output measure, approximately 210V (at less than 10mA), including charging and discharging curves
  •  Inverter generates 3-phase PWM signals, about 210V (at less than 10mA)
  •  Signals at the symbolic electric motor measurable, also filtered in sinusoidal shape, by the smoothing effect of the engine
  •  Signals and messages of the CAN-Bus communication measurable (loading, unloading, status)
  • Learning Objectives
  •  acquire knowledge about the interaction of the electronic components between the high-voltage battery, inverter and electric motor
  •  recognize the dangers of high-voltage power components, explain accident prevention regulations
  •  Security rules: disconnect, secure against reconnection, ensure that there is no voltage, log the steps
  •  Criteria for the use of test devices
  •  deepen your expertise to optimally adjust oscilloscopes and evaluate the presentations
  •  represent pulse width modulated signals and sinusoidal waveforms in detail with the oscilloscope, also between individual phases
  • Equipment Battery Unit
  •  Metal housing heavy duty with rubber feet, powder coated
  •  On the back back: terminals 30, 31 and 15, main switch, air vents
  •  Front panel with colored system imprint, clear design with pilot line and system components
  •  Original service plug, 3 x visible relay (separation contactors), transparent
  •  Socket for high-voltage line on a separate system, connection socket CAN-Bus line
  •  Integrated control unit with CAN controller
  • Equipment Inverter Unit
  •  Handheld device with silicone sleeve
  •  High voltage measuring sockets behind removable cover
  •  2 x measuring sockets in 4mm safety design for inverter voltage DC
  •  3 x measuring sockets in 4mm safety design (u, v, w) for inverter AC voltage for electric motor
  •  Switch for selecting signal: before motor or effect on motor (filter)
  •  3 x measuring sockets in 4mm safety design (high, low, ref)
  •  Connection cable orange, length 5m for high-voltage
  •  Connecting cable black, length 5m for CAN bus

Technical Specifications

  • Battery Unit: L x W x H: 600 x 250 x 140 mm - Weight: 6 kg
  • Inverter Unit: L x W x H: 150 x 80 x 40 mm - Weight: 0,5 kg
  • Power supply: 12 V DC / 3 A, Ignition terminal 15

Write a review

Note: HTML is not translated!
    Bad           Good

Do you have any questions about T-Battery Simulator?