Search
0
Shopping Cart
Choose!

Power Supply Unit TS30 with Function Generator

  • Availability: On Order
  • Brand: Thepra
  • Product Code: 112050030
  • Product viewed: 11825





Share:

Power Supply Unit TS30 with Function Generator

The THEPRA power supply unit TS30 can be specially used in many ways in car electronics. Along with the variable 0 - 15 VDC voltage output and the constant 5 VDC voltage output, this laboratory power supply offers the option of controlling components with pulse width modulation up to 3 A. In addition to this, a flexible function generator is available with signal output.

Specifications

As standard outputs are 0...15 VDC (Imax 3 A) and separate 5 VDC (Imax 1 A) available. The connectors are made of 4 mm safety sockets.

Deviating from common DC power supplies, the TS30 has two additional PWM outputs that are supplied internally with 0 to 15 volts. This makes it possible to directly control actuators at teaching systems and vehicles with a resistance of >= 6 ohm plus or minus in a pulse-width modulated manner (or >= 12 ohms, if both outputs are used simultaneously). Connected actuators can thereby be controlled with a variable voltage of 0...15 volts, which additionally can be pulse modulated 0...100%. The two PWM outputs can be used individually or together. The maximum current is 3 A. This way, the TS30 can simulate the control unit of the vehicle partial system in question and can be used, e.g., for actuator diagnosis.

The function generator component generates sinus, triangle, saw-tooth and square-wave voltages in a frequency range of 3 Hz to 75 kHz. This makes diverse uses for this function generator possible in laboratory and workshop lessons.

The sinus and square-wave voltages can also be used to indicate rotational speed information at teaching systems and vehicles for lesson and diagnosis purposes.

The DC power supply is characterised by its simple operation. All parameters like voltage form, frequency, amplitude and offset can be pre-selected and corrected with a multifunctional switch. The large four-line display presents this information in a well-structured manner.

Outputs

  • Signal (Sine, triangle, sawtooth, rectangle)
  • PWM Pull-Down
  • 5 VDC (constant)
  • 0 - 15 VDC
  • PWM Pull-Up

Variable/Parameter

  • Voltage
  • Frequency
  • Gain
  • Offset
  • Duty cycle (for PWM signal)

Technical data

  • Power supply: 230 V
  • Signal frequency: 3 Hz - 75 kHz
  • Signal output voltage: 0 - 10 V
  • Signal offset: 0... ±5 V
  • DC output 1: 0-15 V
  • DC output 2: 5 V
  • Imax 0-15 VDC output: 3 A
  • Imax 5 VDC output: 1 A
  • Imax Signal output: 200 mA
  • Imax PWM outputs: 3 A

Dimensions

Width 345 mm
Depth 190 mm
Height 70 mm

Write a review

Note: HTML is not translated!
    Bad           Good

Do you have any questions about Power Supply Unit TS30 with Function Generator?