Search
0
Shopping Cart
Choose!

Y-Cables Set Universal (2 & 3 pin)

Complete set with 30 Y-cables 2 & 3 pin plus 18 pin breakout box.

This set consists of most used connectors at all passenger cars. Attention: in this box are only Y-cables and not loose connectors.

The Y-cable or splitter cable must be connected between the sensor/actuator and the connector of the engine wiring harness connector so the sensor of the engine management system is still functioning. By connecting the 18 pin breakout box, measurement can be done in a save way regarding the signals from and to the sensor. This can be done with a multimeter or scoop. The pin numbers on the connector are identical to the numbers on the breakout box. In this way there is no longer need to pierce into wires or damage contacts inside the connector. So not leakage in the isolation (PVC) of a wire with a change for corrosion of the cupper inside of the wire and problems in future. And as last, with an unplugged connector, a sensor will not work anymore and will generate a trouble code in the ECU.

The set consists of the following parts:

574310000 575030002
574218000 575030003
573000015 575030004
575020003 575030005
575020010 575030011
575020011 575030012
575020019 575030014
575020021 575030015
575020022 575030021
575020031 575030023
575020032 575030024
575020036 575030031
575020037 575030032
575020040 575030040
575020048 575030041
575020049 575030042
575020050  

Write a review

Note: HTML is not translated!
    Bad           Good

Do you have any questions about Y-Cables Set Universal (2 & 3 pin)?