Training Car Hybrid Technology with E-Learning

Brand: Thepra
Product Code: 179405200
Availability: On Order

This training system consists of the training vehicle and the corresponding optional e-learning teachware. The practice course modules deepen and complement the theory modules in a unique way.

With this training system the previously acquired knowledge, skills and abilities on the subject of "Electrical High-Voltage-drive" are practiced and tested in practice through work orders. By using the break-out box for the power control module (PCM), the break-out box for the High-Voltage battery and other measurement points the students walk through the measurement tasks independently. The vehicle is prepared with 10 well described and practically relevant errors. As an exercise for the safe handling of High-Voltage-Vehicles a guided troubleshooting is integrated.

The following optional accessories are available:

  • 1x break-out box to the PMC, safe to touch and short-circuit proof!
  • 1x break-out box for the HV battery and BMS (Battery Management System) safe to touch and short-circuit proof!
  • 50x test sockets to support troubleshooting
  • 10x Error hook-up with work order and description
  • 6x Safe to touch and short-circuit proof gauge points on inverter
  • Transparent shield of the inverter and the HV battery
  • All additional high voltage measuring outlets are voltage reduced by 10:1

Optional Teachware:

  • E-learning module "Toyota Prius and turn safety Voltage Sources" (EU Stage 2)
  • E-learning module "Toyota Prius Recognize and name hybrid components" (EU Stage 2)
  • E-learning module "Toyota Prius drive variants" (EU Stage 2)
  • E-learning module "Toyota Prius HV battery" (EU Stage 3)
  • E-learning module "Toyota Prius HV battery on a dynamometer" (EU Stage 3)
  • E-learning module "Toyota Prius state of the HV battery" (EU Stage 3)
  • E-learning module "Toyota Prius energy flows CVT Introduction" (EU Stage 4)
  • E-learning module "Toyota Prius energy flows CVT on the dynamometer 1" (EU Stage 4)
  • E-learning module "Toyota Prius energy flows CVT on the dynamometer 2" (EU Stage 4)
  • E-learning module "Toyota Prius energy flows CVT on the dynamometer 3" (EU Stage 4)
  • E-learning module "Toyota Prius Guided Troubleshooting" (EU Stage 3)
  • E-learning module "Toyota Prius Control MG2, voltage and power" (EU Stage 4)

If a dynamometer (dyno) is not available, pictures and video materials are included.

Optional work orders troubleshooting or diagnostic:

  • Work Order ABS / TRAC / VSC (warning light 'ABS' and 'ASR' on)
  • Work order and ECT Engine (poor driving performance)
  • Work Order PMC (vehicle does not move)
  • Work Order PMC (stops the vehicle and to be towed)
  • Work Order PMC (vehicle runs rough at start up)
  • Work Order PMC (warning light 'check hybrid' lights)
  • Work Order PMC (vehicle sometimes can not be switched from 'P')
  • Work Order PMC (vehicle stops, 'check hybrid' light on, can no longer be in switched into 'D' o 'R')
  • Work Order PMC (vehicle stops, several messages on the display)

Note that it is assumed in the work orders that the instructor is certified as an expert for "handling of live equipment" (in the sense of BG 8686) and able to monitor all steps of the trainees. The responsibility for the use of this training system is in all cases at the educational institution and the course leader. In the vehicle emergency stop switches are installed, with which all live parts of the high voltage system can be de-energized. All the high-voltage measuring points have a reduced voltage by the factor of 10:1.

Available for the following vehicles: Toyota Prius 3, Toyota Prius 2, Toyota Yaris Hybrid

Do you have any questions about Training Car Hybrid Technology with E-Learning?

TECHNOLAB SA - Automotive © 2017 - Changes reserved!