Electromechanical Power Steering

Brand: TECHNOLAB Automotive
Product Code: 179300105
Availability: On Order

Functional model of an original electromechanical power steering...

In this functional model of an original electromechanical power steering the components are exposed within the steering housing in order to demonstrate for example the operation of the double drive pinion. Because of the extremely high forces on all moving parts and rotating the open areas were fitted with transparent covers for safety. More representable functions are active reset in the directional stability as well as the controlled demand for power consumption for reduction in fuel consumption. The communication between the control unit for steering column electronics, the diagnostic interface (gateway) and the Diagnostic Interface (OBD) is done via CAN Bus.

Steering angle, power consumption and torque can be tested and measured using standard workshop diagnostic systems via the OBD interface. In order to increase the steering forces partially, a resistance pressure box is mounted. Thus, the required effort with and without assistance can be represented visually. The system has a control panel with emergency stop switch, ignition switch, indicator light and OBD interface. The power supply is provided by a vehicle battery. Optional error circuit 6 switches / 12 errors and associated test sockets (pin-outs) in 4mm design.

Specifications

  • Power supply: 110/240 Volt power supply
  • Dimensions: L x W x H 102 x 95 x 145 cm
  • Weight: 80 kg

Do you have any questions about Electromechanical Power Steering?

TECHNOLAB SA - AUTOMOTIVE © 2017 - Changes reserved!